Two independent channels for instrument and z. B. high quality condenser microphones. Channel 2 provides 48-V phantom power. For channel 1, 9 V phantom power can be switched on in order to supply your pickup system with the required voltage. A customized 8 “twin cone loudspeaker and 60 watts RMS output power, sufficient to dynamically and powerfully amplify your instrument in every rehearsal room and on club stages. High-end DI-out to the FOH system 4 onboard effects: short reverb, long reverb, delay, chorus The effect can be added to each channel via a PAN control. 7 kg light weight, transportable in all public transports and also as hand luggage on airplanes. Independent 3/2-band EQ All AER amplifiers are delivered with a high quality padded gigbag. Recommended are: Acoustic guitar, voice, wind instruments, mandolins, oud, traditional Chinese instruments, mouth harp, but also cellos and electrical instruments That's what Søren Golz an Ivan Danilov says: Classic guitarists from Germany The Compact 60/4 are just right for us because: they authentically reproduce the sound of our instruments without alienation. Even if you turn up the volume a bit more, the sound remains very true to the original. There is no other manufacturer in this form (our opinion). The simple (in a positive sense), stylish design and the associated high and especially reliable functionality (so far there has not been a single problem) convince us again and again. Price-performance is unbeatable! We have btw. also so far after each concert, where we have used the amps, consistently positive feedback received.

Channel 1 6.3 mm (1/4”) input jack socket as high impedance line input stage with pad (high/low attenuation) 9 V phantom power and gain control Channel 2 combined XLR/6.3 mm (1/4”) input jack socket as high quality line or balanced microphone input stage 48 V, gain control Equalizer three band tone controls for channel 1 and two band tone controls for channel 2 Colour ‘mid-cut-treble-boost’-filter Digital effect processor with 4 presets: 2 x reverb, delay, chorus Power amp 60W / 4 ohms, dynamic control Speaker system 8” (200 mm) twin cone speaker Features headphones, line out, switchable DI-out, external effect loop via send and return, footswitch, aux in (internal/external effect on/off ) Dimensions 260 mm x 325 mm x 235 mm (10.20“ x 12.80“ x 9.25“), HxWxD Weight 7.1 kg (15.6 lbs)